Monday 11 June 2012

DELL STREAK ROM FIX FAIL UPGRADE

DELL STREAK ROM FIX FAIL UPGRADE

Official rom version (Android 2.2.2) (CHECK ABOUT AT YOUR DEVICES)

.Baseband version=GAUSB1A134700-EU
.OEM version=GAUSB1A134700
.Build number 15274
.Kernel version 2.6.32.9-pert


What you need
  1. StreakMod-Recovery      (3rd party recovery,to backup,restore and flashing 3rd party custom rom)
  2. Baseband318                    (is official version BASEBAND VERSION after flash will be GAUSB1A135100-EU)
  3. Dell-Recovery318            (official version RECOVERY after flash will be GAUSB1A135100 )
  4.  InstallDellMSync.exe     (dell ADB driver for recovery mode)
  5. ADB_Tethering_Driver   (dell ADB driver for recovery mode)
  6. Streak_318_12821_00     (dell official new version rom)
 Start fix return back default rom
1.When the device stuck at Dell Logo after OTA upgrade,remove battery and put it back, press and hold POWER button and Camera button.
 
                                                wait until the screen show as picture below
                                   (touch the FASTBOOT on screen to boot into fastboot mode)

2 .Open MultiRecoveryFlasher.v0.8 folder click on MultiRecoveryFlasher.bat

3.Wait until your computer screen show as picture below
4.Copy Streak_318_12821_00.pkg to Memory Card and rename the file to update.pkg make sure microSD was formatted with fat32 before copy the rom.

5.Press power button when dell logo launch press and hold volume up and down button to boot up recovery.
                                        (Select No 2 and press camera button key to upgrade firmware from microSD)

6.Wait until installation finish will auto reboot.
 
7.After reboot follow back step No 1 remove battery and put it back, press and hold POWER button and Camera button to boot fastboot for prepare to flash Baseband318.

8.Open MultiBasebandFlasher.V0.1 folder click on MultiBasebandFlasher.bat then key b318 to flash new version on baseband.
9.Wait until finish key in R at select mode to restart your devices.

10.DONE

SUPER USER(ROOT) HTC Sensation ICS(4.0.3) with HBOOT 1.27.0000

SUPER USER(ROOT) HTC Sensation ICS(4.0.3) with HBOOT 1.27.0000

DISCLAIMER: i won’t be responsible if this process bricks your device



1.      Make sure your device battery is fully charged
2.      Make sure you have GOLD CARD
3.      Go to SETTINGS\DEVELOP OPTION
4.      Make sure USB DEBUGGING is TICK
5.      Shut down the device & take out the battery & put it back to device
6.      Long press POWER BUTTON & VOLUME DOWN BUTTON until you see the white screen similar like below.


7.Make sure is ***LOCKED***

8.Make sure is PYRAMID PVT SHIP S-ON RL

 9.Make sure is HBOOT-1.2.7.0000

10.Prepare one empty memory card and plug to your device

11.Go to WWW.HTC.COM download the latest HTC sync

12.Download  TEMPROOT ZIP

13.Extract temproot-sensation-windows.zip into a directory on your computer.

14.Plug your HTC SENSATION/XE into your computer via USB.

15.Double click temp_root.bat to run the script and wait until it completes. Don't touch the device during  the entire process.

16.After done,your device will automatic reboot into Android OS main screen without any ICON.JUST LEAVE IT,DON’T EVER TOUCH YOUR DEVICE SCREEN. 17.Download the Control Bear unlock tool
18.Extract and double click ControlBear.exe
20.Notice your computer screen

Do not remove sdcard from phone
Do wire-trick now!! Look instructions at web

Do not remove sdcard from phone
Do wire-trick now!! Look instructions at web

Do not remove sdcard from phone
Do wire-trick now!! Look instructions at web
Waiting device....

21. Use a paper clip to contact the connection
(contact and release one second and contact and release at all)

If done incorrectly (as in the timing is wrong) you will get this message.

Do not remove sdcard from phone
Do wire-trick now!! Look instructions at web
Waiting device....
Found device... Please wait...
Getting into bar.....
Raising Glass
SUCCESS - Taking a sip.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Buddies and Beer
Checking alcohol level......
Let's take one more......

Errorcode: 66732337
ErrorMsg: Still sober
Quit....
Press ENTER to exit..... 



If so, please close Control Bear.exe and reopen it and it will start again.
(Please refer to below youtube link to watch the tutorial)

Once it's done successfully, you will see this message...

 ======== ControlBear version 0.2 for JuopunutBear S-OFF ==========
Starting up......
Making room for beer......
Loading sixpacks on sdcard......
Loaded......
Do not remove sdcard from phone
Do wire-trick now!! Look instructions at web

Waiting device....
Rebooting device
Please wait....
Found device... Please wait...
Getting into bar.....
Raising Glass
SUCCESS - Taking a sip.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Buddies and Beer
Checking alcohol level......
Seems to be just right.....
Let's take one more......
Aaaah, nice sunny day!!
Rebooting.......
Waiting device....
Found device... Please wait...
Rebooting bootloader.......
Waiting device....
Fastboot detected
JuopunutBear S-OFF success
Do you want to install JuopunutBear modified hboot? (y/n)
Installing JuopunutBear hboot.....
Waiting.....
Flashing.......
Rebooting......
JuopunutBear hboot installed
Press ENTER to exit..... 

 

Now, that's it and you are done. It will reboot into Bootloader and you will see this:
22. once control Bear is over..don't do anything to the device and let it be connected--and if the device is left in bootloader---reboot manually using power and vol up/down

23. now you guys need to remove the temp root which you have created first
to do that Double click temp_root_remove.bat to run the script and wait until it completes. Don't touch the device during the entire process.After done, Your device will boot into Android OS normal mode.

24.Plug the usb cable to your device and boot into HBOOT and select FASTBOOT(follow step 4 & step 5)
 
25.Press window icon key in your PC and taip CMD and press enter key
 

Taip cd in your CMD.exe and press SPACE key

26.DRAP “ temproot-sensation-windows” folder and DROP to CMD.exe and press enter key






27.Taip the command as below;

fastboot oem writecid 11111111 (to change CID)
fastboot reboot-bootloader (bootloader will reboot)
fastboot getvar cid (it will confirm your CID as 11111111
fastboot reboot (to reboot back to Android OS)

28.Download CWM Recovery V5.0.0.8

29.Extract and put PG58IMG.zip into memory card.

30.Download Superuser-3.0.7

31. Extract and put Superuser-3.0.7.zip  into memory card and plug into your device.

32.Boot into HBOOT(follow step 4 & step 5)

 33.Press VOL  UP to start update




34.After done,press VOL DOWN to choose RECOVERY and press POWER BUTTON to enter.




35.In CWM Recovery Mode,press VOL DOWN to choosing and press POWER BUTTON to enter

--install zip from sdcard
--choose zip from sdcard
--superuser-3.0.7.zip






36.After install superuser-3.0.7.zip,back to main menu and choose reboot system now.

37.Congratulation,your HTC Sensation/XE haven been ROOT.

P/S: Info Job special thanks for Kevin Lee.